Parker 462 alternative: SK216S compact hydraulic hose
Parker 462 alternative: the SK216S compact hydraulic hose
The Parker 462 is a widely used compact twin-wire braided hydraulic hose for medium pressure applications. Van de Calseyde offers a full alternative: the SK216S, a compact 2-layer braided hose developed in collaboration with Intertraco.
The SK216S exceeds the EN 857 2SC standard — just like the Parker 462 — and is available in all common dash sizes.
Technical comparison: Parker 462 vs SK216S
| Property | Parker 462 | SK216S (Van de Calseyde) |
|---|---|---|
| Standard | EN 857 2SC / ISO 11237 type 2SC | EN 857 2SC / ISO 11237 type 2SC (exceeded) |
| Inner tube | Nitrile (NBR) | Nitrile (NBR) |
| Reinforcement | 2 high-tensile steel wire braids | 2 high-tensile steel wire braids |
| Cover | Synthetic rubber | Smooth synthetic rubber |
| Temperature range | -40°C to +100°C | -40°C to +100°C (peaks to +125°C) |
| Skiving type | No-skive | No-skive or outer skive (depending on fitting) |
| Compatible fluids | Mineral oil, water-glycol, lubricating oil, water | Mineral and biological hydraulic oil, polyglycol, water/oil emulsions, water |
Available sizes SK216S
| Part number | DN | Inch | Dash | Inner diam. (mm) | Outer diam. (mm) | Working pressure (bar) | Bend radius (mm) |
|---|---|---|---|---|---|---|---|
| SK216S-DN06 | 06 | 1/4 | -04 | 11,1 | 13,1 | 450 | 45 |
| SK216S-DN08 | 08 | 5/16 | -05 | 12,7 | 14,7 | 420 | 55 |
| SK216S-DN10 | 10 | 3/8 | -06 | 15,1 | 17,1 | 385 | 65 |
| SK216S-DN12 | 12 | 1/2 | -08 | 18,3 | 20,0 | 350 | 80 |
| SK216S-DN16 | 16 | 5/8 | -10 | 22,7 | 24,7 | 290 | 90 |
| SK216S-DN20 | 20 | 3/4 | -12 | 25,4 | 27,7 | 280 | 120 |
| SK216S-DN25 | 25 | 1 | -16 | 33,7 | 35,8 | 225 | 150 |
Applications
The SK216S is designed for demanding medium pressure hydraulic applications in mobile machinery, industrial installations, and manufacturing. Compatible with mineral and biological hydraulic oils, polyglycol-based oils, water/oil emulsions, and water.
Compatible Van de Calseyde fittings
The SK216S is fully compatible with our fitting range:
- No-skive: X + SN03T (dash -04 to -16)
- No-skive: X + SCX0T (dash -04 to -16)
- Outer skive: X + S0210 (dash -04 to -16)
Our technicians will help you select the right fitting combination for your application.
Why choose the SK216S as a Parker 462 alternative?
The SK216S was developed in collaboration with Intertraco, an Italian hydraulic hose manufacturer with over 50 years of experience. Together with Van de Calseyde, we tuned this hose to our complete fitting range, ensuring a validated hose-and-fitting combination.
As a fourth-generation hydraulic wholesaler, we supply from stock in Ghent and provide technical support for selection and assembly.
Frequently asked questions
Is the SK216S a direct replacement for the Parker 462? Yes. Both hoses comply with EN 857 2SC / ISO 11237 type 2SC and have comparable working pressures and temperature ranges. The only practical difference is skiving type: the Parker 462 is no-skive, while the SK216S requires no skive or outer skive depending on the fitting used.
Which fittings should I use with the SK216S when switching from Parker 462? Van de Calseyde supplies matched fittings. Contact us for personalised advice based on your existing installation.
Does Van de Calseyde supply custom-assembled hoses? Yes. We assemble hoses to specification in our workshop in Ghent, including crimping and quality control.